RF-FIELDWORK VCO Design System

Tr8自主 LC VCO 设计系统 · 私有 · 展示页Autonomous LC VCO design · private · showcase

规格进去,
冻结的 VCO 出来。
Hand it a spec.
Get back a frozen oscillator.

VCO Design System 是围绕开源的 VCO Design Studio 搭起来的完整设计系统:agent 读规格、查实测证据选结构,驱动商用电路仿真器做真实仿真,读诊断、自己修,最后把每一个控制码都回归一遍,冻结、交付。每一步都留回执,每个结论都只写测到的东西。VCO Design System is the complete design system built around the open-source VCO Design Studio. Agents read the spec, pick a structure from measured evidence, drive a commercial circuit simulator, read the diagnosis and repair the design themselves, then regress every control code before freezing and delivering. Every step leaves a receipt, and every claim is limited to what was measured.

五层 × 十二步:亮点是这一步用到的层,黄色虚线是两条返工回路。点某一列可停在那一步,再点一次继续播放。示意,不是仿真数据。Five layers × twelve steps: lit nodes are the layers a step uses; the dashed amber paths are the two rework loops. Click a column to hold that step, click again to resume. Illustration, not simulation data.


规模At a glance

不是一个脚本,
是一套系统。
Not a script.
A system.

设计技能、流程程序、知识与证据、多 agent 协作,各自独立维护,靠共同的 ID 和来源连在一起。数字为当前状态。Design skills, the flow program, knowledge and evidence, and multi-agent collaboration are maintained separately and joined by shared IDs and sources. Figures reflect the current state.

12
步设计流程,从规格到交付flow steps from spec to delivery
6
种振荡器结构(五个文献家族)oscillator structures (five published families)
36
个格子的查表进度cells in the lookup progress table
9
个设计技能:一个入口,八个专项design skills: one entry, eight specialists
130
张结构化知识卡structured knowledge cards
225
个去重实测状态(283 条审计记录)unique measured states (283 audited records)
20
份专题研究与审查报告study and review reports
246
个单元测试守着流程合同unit tests guarding the flow contract

架构Architecture

五层,
各守各的边界。
Five layers,
each with a hard edge.

每一层只做自己的事,也写明不能替别的层做什么:知识不替你选架构,技能不能用叙述绕过仿真,程序不会把“工具跑完了”升级成“设计合格了”。点一层看细节。Each layer does its own job and states what it must not do for the others: knowledge does not choose the architecture, skills cannot talk their way around a simulation, and the program never upgrades “the tool finished” into “the design qualifies”. Select a layer for details.

负责Owns
不替代Never replaces

设计流程Design flow

十二步,
两段,两个回路。
Twelve steps,
two phases, two loops.

所有结构共用同一条流程。设计段在三个代表码上做,交付段把每个码重测一遍;不达标就沿回路退回去重做。每个节点下方标着它用到哪几层。Every structure shares one flow. The design phase works on three representative codes; the delivery phase re-measures every code; a miss goes back along a loop. Each node shows which layers it uses.

按层高亮:Highlight by layer:

设计段Design phase三个代表码:最低、中间、最高three representative codes: lowest, middle, highest

A · 起步A · Start

01规格与选型Spec & structure

选出有实测依据的候选结构Shortlist structures backed by measured evidence

02谐振腔扫描Tank scan

先确认够得着频带、能起振Confirm the tank can reach the band and start

✕ 够不着 → 提前停下并说明原因✕ out of reach → stop early and say why

B · 落地B · Realize

03中心与功耗Center & power

中心频率与带中功耗落到目标Put center and band-center power on target

04逐码偏置均衡Per-code bias

整个控制范围起振一样稳Even startup across the control range

05三码相噪Three-code PN

三个代表码上测相噪与 FoMPhase noise and FoM on three codes

C · 加固C · Harden

06二次谐波返回2nd-harmonic return

按结构设计谐波返回网络Design each structure's harmonic return

07起振检查Startup check

每个评估码都要能起振Every evaluated code must start

不足short
08自动增益恢复Gain recovery

自动找修复并完整验证Find a repair, verify it in full

通过pass
09探索变体Variants

预算有余再找更优解Look for better while budget lasts

↺ 回路 1:修复后回到 06–07 重新评估,直到通过或预算用完↺ Loop 1: after a repair, back to 06–07 until it passes or the budget ends

交付段Delivery phase每一个控制码every control code

10全码回归All-code regression

交付前每个码都重测Re-measure every code before delivery

11收敛与冻结Converge & freeze

换数值设置复核,再冻结Re-check with other numerics, then freeze

12交付Delivery

设计、码表、回执和缺口一起交付Design, code table, receipts and gaps

↺ 回路 2:任何一个码不达标 → 退回设计段↺ Loop 2: any code misses → back to the design phase

最新进度Latest progress

36 个格子,
34 个通过。
Thirty-six cells,
thirty-four pass.

六种结构 × 三个频率 × 每个频率两档功耗上限,在一套商用 CMOS 工艺上从模板起步全自动设计。格子里是最差码在 1 MHz 频偏处的相噪 FoM(dB);判定同时看中心频率、调谐范围 TR ≥ 30 %、频带中心的功耗和每个评估码的起振。Six structures × three frequencies × two power caps per frequency, designed fully automatically from templates in a commercial CMOS process. Each cell shows the worst-code phase-noise FoM at a 1 MHz offset (dB); a cell passes on center frequency, tuning range TR ≥ 30 %, band-center power and startup at every evaluated code.

Tr8
通过pass约束未满足constraint not met没有设计no design数字:最差码 FoM @1 MHz,dBnumbers: worst-code FoM @1 MHz, dB
34/ 36
格子通过cells pass
6/ 6
Hegazi 尾部滤波:全部工况通过,包括 20 GHzHegazi tail filter: every condition, 20 GHz included
192.5dB
最好的最差码 FoM @1 MHz(Du,5 GHz)best worst-code FoM @1 MHz (Du, 5 GHz)

原则Principles

每个失败,
都让流程变好一点。
Every failure
makes the flow better.

系统不靠一次做对,而靠一个闭环:问题被测出来、被分类,修成对所有结构都成立的通用修复,经验写回知识层,之后的每一次设计都直接受益。The system does not rely on getting it right once. It relies on a loop: a problem is measured and classified, fixed as a general repair that holds for every structure, and the lesson is written back, so every later design benefits.

  1. 01

    发现问题Find the problem

    实测失败,带原因分类:流程可修,还是物理受限A measured failure, classified: flow-fixable or physics-limited

  2. 02

    解决问题Solve it

    做成通用的流程修复;复跑验证,另一模型家族独立审查A general flow fix, verified by re-running and independent cross-model review

  3. 03

    沉淀经验Capture it

    写进知识卡、实测证据、技能和规则Into knowledge cards, measured evidence, skills and rules

  4. 04

    流程变好The flow improves

    之后每一次设计都从更好的起点出发Every later design starts from a better place

贯穿全程的硬规矩:Hard rules throughout: 只写测到的;未知不等于不可行;起振判定失败即关闭;每次仿真都有回执;研究通过不等于产品通过。report only what was measured; unknown is not infeasible; startup fails closed; every simulation leaves a receipt; a research pass is not a product pass.


Crescendo 接口The Crescendo interface

参数搜索,
交给 Crescendo。
Parameter search,
by the Crescendo engine.

系统里的参数搜索不另写优化器,而是调用 Crescendo 引擎的无头优化器。引擎负责提出候选,系统负责把每个候选真正仿真一遍。The system does not carry its own optimizer: parameter search calls the Crescendo engine's headless optimizer. The engine proposes candidates; the system actually simulates every one.

算法Algorithms
ask/tell 种群优化:贝叶斯优化、差分进化、NSGA-II、随机搜索ask/tell population search: Bayesian optimization, differential evolution, NSGA-II, random
评价Evaluation
系统提供显式评价器,每个候选都跑真实仿真An explicit evaluator from the system runs a real simulation for every candidate
采纳Adoption
失败或不可行的候选一律不采纳Failed or infeasible candidates are never adopted
回执Receipts
每次运行都记下引擎版本与源码哈希Every run records the engine version and source hashes
版本Release
固定使用一份只读的引擎发布版本A pinned, read-only engine release

和 VCO Design Studio 的关系Relation to VCO Design Studio

开源的是底座,
这里是整栋楼。
The foundation is open.
This is the building.

VCO Design Studio 负责电路本身:五个文献家族的拓扑、唯一的电气图、分层原理图和原生导出,MIT 开源。VCO Design System 在它上面加了会做设计的部分:流程程序、技能、知识与证据、多 agent 协作。后者是私有系统,不开源,本页只做展示。VCO Design Studio handles the circuit itself: five published topology families, one electrical graph, packaged schematics and native export, open source under MIT. VCO Design System adds the part that designs: the flow program, skills, knowledge and evidence, and multi-agent collaboration. It is private and not open source; this page is a showcase.

VCO Design Studio(开源)VCO Design Studio (open)
VCO Design System(私有)VCO Design System (private)
给出拓扑和能读的原理图Gives you the topology and a readable schematic
从规格开始,自己选结构、定尺寸、跑仿真、修问题Starts from a spec and chooses, sizes, simulates and repairs on its own
证明导出和电气图等价Proves the export equals the electrical graph
证明设计在每个控制码上都满足约束,并独立复核收敛Proves the design meets its constraints on every control code, with an independent convergence check
工程师在界面里用Used by an engineer in the interface
多个 agent 分工协作,共享仿真槽位,跨模型审查Several agents divide the work, share simulation slots and review each other across model families

数据口径About the data

  • 36 格进度表来自维护者本机在一套商用 CMOS 工艺上的前仿:典型工艺角、室温、标称电源,磁性元件为带显式损耗的理想模型;历史实测证据和系统规模数字按各自口径统计。不含 PVT、蒙特卡洛、版图与后仿,也不代表可靠性。The 36-cell progress table comes from the maintainer's local pre-layout simulation in one commercial CMOS process: typical corner, room temperature, nominal supply, ideal magnetics with explicit loss; historical evidence and system counts use their own scopes. No PVT, Monte Carlo, layout or post-layout results, and no reliability claim.
  • 进度表用的是查表研究条件,和具体产品规格的验收分开;“通过”是研究意义上的通过。The progress table uses lookup research conditions, separate from acceptance against a product spec; “pass” is a research pass.
  • 数字做了取整;进度表只标频率和功耗档,不给具体功耗值。设计方法的阈值、算法和参数有意不在本页公开。Figures are rounded; the progress table labels frequency and power tier only. The method's thresholds, algorithms and parameters are deliberately not published here.
  • 首屏动画是示意,不是仿真数据。结构家族的出处见 VCO Design Studio 页面的参考文献。The hero animation is an illustration, not simulation data. Sources of the structure families are listed on the VCO Design Studio page.